← All Industries
Industry 06

Automotive and Industrial

Heavy-duty shrink-sleeve labels for automotive fluids, lubricants, and industrial chemical containers.

Automotive and Industrial

Automotive-fluid and industrial-chemical labels must survive engine oils, solvents, and warehouse abrasion while grade codes and hazard text stay legible. PETG shrink sleeve film resists these fluids, and high-gauge options up to 60 μm add durability on lubricant bottles, coolant jugs, and chemical drums.

High transverse shrinkage (TD ≥75-80%) delivers full-body sleeves with room for the dense safety information no partial label can fit. For returnable industrial glass, PETG Bidirectional (TD ≥70%, MD 35±5%) washes off in hot-water lines. The sleeve wraps the container exterior only.

Application Scenarios

Where PETG shrink film shows up in automotive and industrial

Lubricants packaging shrink labels
Lubricants packaging shrink labels
Multi pack sleeve
Multi pack sleeve
Pil packaging shrink labels
Pil packaging shrink labels

Engine oil bottles, fluid containers, lubricant packs

Film Selection

Which film for which automotive / industrial product

FilmKey specBest for
Clear PETGTD ≥75-80%, up to 60 μmPrinted into sleeves for lubricant and engine-oil bottles, chemical drums and jugs — fluid and abrasion resistance, dense hazard data stays legible
PETG BidirectionalTD ≥70%, MD 35±5%Wash-off labels for returnable industrial glass containers

All films supplied in 30-60 μm thickness and 200-2000 mm width. Halogen-free; GRS / REACH / RoHS certified. MOQ 1-3 tons.

Recommended films: Clear PETG ·PETG Bidirectional

Frequently Asked Questions

How durable is PETG film for automotive fluid bottles?
PETG resists common automotive fluids — engine oils, lubricants, and solvents — and abrasion from warehouse handling. High-gauge options up to 60 μm add toughness for lubricant bottles, coolant jugs, and chemical drums, keeping printed grade codes and safety information legible through storage and end use.
Which film suits industrial chemical drums and large containers?
Larger and more contoured industrial containers usually pair higher transverse shrink (TD ≥75-80%) with a heavier 60 μm gauge for durability and full-body 360-degree coverage of dense hazard and grade information. Straight drums can run lower shrink. Send container dimensions for a film and gauge recommendation.
Can labels be removed from returnable industrial glass containers?
Yes, with PETG Bidirectional film. It shrinks in both directions (TD ≥70%, MD 35±5%), so an adhesive-backed wash-off label detaches from glass during a 70-85°C caustic wash cycle, supporting returnable and refillable industrial container programs without a manual label-removal step.

Working on a automotive and industrial project?

Tell us your required shrinkage rate and film thickness — we'll match the right film.

Request a Quote